Bypass T2 Mac - Untethered 10.2-10.5

Main features:

• Untethered Bypass - No need to repeat the process when the battery runs out or after a reboot


• Supports OTA updates


• Cannot be erased or wiped with Configurator (if done, a free re-bypass is required)

Instructions to perform the bypass:

1. Restore the T2 machine to the latest bridgeOS


2. Power on until you see the "World" screen


3. Do not set up Wi-Fi - open the iAldazT2Activator app immediately


4. Put the device into DFU mode


5. Once the bypass is complete, power on the T2 machine


6. You will see the "Folder" screen - this indicates the device is activated

macOS installation:

1. Shut down the Mac


2. Turn it on while holding Left Command + R + Power


3. Launch the macOS installation assistant


4. Enjoy your T2 Mac with bypass!

Note: If you erase or wipe with Configurator, you will need to perform the bypass again.